Glossy clear adhesive
vinyl.
HYAZ
TM Inkjet Media
1) Copy/Print on to
the coated side of the media using a compatible Inkjet Printer.
2) To prevent a paper
jam, make sure the vinyl is not bent or warped or the corners folded
BEFORE loading. Loading by hand ONE SHEET at the time to make sure
it loads correctly.
3) When gluing a vinyl
label to any surface, clean the surface and remove residual grease,
soot or dust.
4) It is not recommended
(on larger labels like 11" X 17") to remove all the back paper before
installing. It’s better to remove the paper from a small area at
one end first such as a 1/2" vertical strip at the left hand or
right hand edge.
5) Line up your label.
When the position looks correct, let the label make contact with
the surface on the edge where you removed the back paper.
6) Now bend the label
back and carefully remove the rest of the protective back paper,
and glue the label down working from the end you glued first. Then
work your way towards the other end holding that end away from the
surface. You can use your finger or a sponge and only press down
(glue) a small area each time to prevent trapping air bubbles. Do
not use excessive pressure when working the label in this way because
you may smudge the ink.
7)
If the label is used outdoors
you must use a clear spray over laminate.
Such as our LLA500 aerosol UV over laminate.
You can spray the
label before you apply it (after printing) to prevent over spray.
Using clear spray as the
only protection will offer limited water proofing. Use our sheet
based Waterproof Over-Laminate to provide extra durability.
To extend UV resistant of Inkjet media
HPS offers over laminate with built in UV barrier.
Printing and Application
Instructions
|
Item # |
IVF8511GC 10 sheets pack |
|
Media |
Self Adhesive Vinyl |
|
Media Type |
Inkjet |
|
Color |
Clear / Transparent |
|
Printers |
Most Desk Top |
|
Type of Adhesive |
Permanent. |
|
CANON 600 SERIES
Media Choice: High Res. Paper
Print Quality: Photographic
Print
Normal Resolution
|
CANON 4000 SERIES
Media Choice: High Res. Paper
Quality: Photographic Resolution::
Standard
|
EPSON PHOTO EX
& PHOTO 700
Media Type: 360 dpi Ink Jet
Paper
Print Quality: Photo
|
EPSON 400, 600, 700, 800, 1520,
3000, 5000 SERIES
& STYLUS PHOTO
Media Type: 360 dpi Ink Jet
Paper
Print Quality: Photo
|
EPSON 400, 600, 700, 800, 1520,
3000, 5000 SERIES
& STYLUS PHOTO
Media Type: 360 dpi Ink Jet
Paper
Print Quality: Photo
|
HEWLETT PACKARD 600, 700, 800,
1000 & PHOTOSMART PRINTERS
Media Type: Premium Ink Jet
Paper
Print Quality: Normal
|
Printer Settings
If your printer is not listed here then
select transparency and normal resolution.
For complete updated
list of our media and to order on line go to
www.Papilio.com or call
817-489-5249
General:
If you are working with 4.25" x 11"
vinyl you can try removing all the backing material and then use
the technique described above.
NOTE:
If using self adhesive media, note that any adhesive may become
difficult to remove over time. If you want to use self adhesive
media on automobiles or other items where you don’t want the label
to become permanent or difficult to remove after long time, then
we recommend our selection of media with a removable adhesive
Disclaimer:
We have tested our media in various personal inkjet printers with
good results. The user of this paper/film must determine the suitability
of this product before beginning production, using his equipment
and method of application. The sellers and manufactures maximum
obligation shall be to replace paper/film that has been found to
be defective. Neither the manufacturer nor the seller shall be held
liable for any injury, direct or consequential, arising out of the
use of, or inability to use this paper/film.
                                                                             
home |
help| about us |
e-mail
HPS LLC. Copyright 2003-2007 Papilio.com
|
