Inkjet Ultra Cling.
Ultra Cling Clear Vinyl is
our Original Clear Ultra Cling Media. This media is ideal for any application
that will not accept static cling.
See more general information
on our Ultra cling here below on this page.
To make professional looking
car window stickers use the Clear Ultra Cling and the Window Masking Spray.

For car window stickers, order also the
Window-Masking Spray Gloss White
Size: 12oz/463ml
Color: Glossy white
Item# PWMS12OZ
Add
to cart
Clear Ultra Cling Vinyl
Ultra cling can be used on almost any substrate where as Static Cling must
be used on glass or glossy finished items only. Papilio Ultra Cling has
one side coated with inkjet coating and the other side coated with a special
cling substance that uses special “micro-spear technology” to CLING to substrates.
This technology is similar to regular adhesive but when it is time to remove
the label it can be peeled safely off almost any substrate. This media is
in fact similar to our Removable Waterproof Vinyl but is more advanced and safer on
delicate substrates than the ultra low peel adhesive.
The Ultra Cling is now available in clear and white for both
Laser and Inkjet printers. Please note that media designed for use in Inkjet
printers is NOT safe for use in a Laser printer and media designed for
use in a Laser printer will in most cases NOT work at all in an Inkjet printer.
So make sure that you select the correct media for your printer type.
If ultra cling media is to
be used indoors where steam or moisture is present then the artwork must
be protected with a clear spray after printing. For Car windows we strongly
recommend the UCF media.
To extend UV resistance of Inkjet media, HPS offers both sheet and
aerosol over-laminates with a built
in UV barrier.
Ultra Cling Vinyl is our Original Ultra Cling Media. This media is ideal
for any application that will not accept static cling. See more general
info on our ultra cling below.
For Car windows we strongly recommend this
CLEAR ULTRA CLING media as static cling can sometimes fall off glass surfaces
that are subject to radical temperature change, such as car windows. The UCF (Ultra Cling
Film) works in the same way as the static cling but it has a next generation
micro spear coating that clings to more types of substrates than
static cling.
The UCF film is intended
for indoor use only but may be used temporarily outdoors if laminated by
using an overlaminate spray or film.

For car window stickers use the clear ultra cling and the white window
masking spray.
(We recommend the Aerosol Papilio Decal Fixative, or Krylon Crystal
Clear Acrylic Spray)
Printing:
1) Copy/Print on to the coated side of
the media using a compatible printer.
2) To prevent a paper jam, make sure the sheets are not bent or warped or
have corners folded BEFORE loading. Loading by hand ONE SHEET at the time is
a way to make sure it loads correctly. For this media it is important to
select the correct printer driver setting. In general the transparency setting
or glossy photo film setting (not paper) will work best. Depending on the
Inkjet printer and ink used the label may be ready for use in as little
as a few minutes. In some cases you may have to allow the ink to dry for several
hours or over night. Some universal refill inks may NOT work with this media.
Mounting:
1) When mounting this label to any surface, clean the substrate and remove
residual grease, soot or dust. This media uses new type of tacky film (micro
spears) to adhere to most substrates even cardboard, wallpaper, smooth wood
etc.
2) Peel the film GENTLY off the supporting paper in such way that you avoid
stretching the media.
3) Line up your label. When the position looks correct, let the label make
contact with the surface on one edge and work down the rest of the surface
using your fingers. Do not use excessive pressure when working the label
in this way because you may smudge the ink.
Tip: To make Ultra cling labels for automobile windows or when you want
the label to be visible from the other side of a window or glass door. Follow
the steps here above with two exceptions. Note: You must be using the CLEAR
Ultra Cling. A) Print mirror image B) Spray the whole sheet with WHITE acrylic
paint when the ink is dry. C) Let the paint dry. D) Follow mounting instructions
here above.
For Car windows we strongly recommend the
UCF media as static cling can sometimes fall off glass surfaces that are
subjected to radical temperature change, such as car windows. The UCF (Ultra
Cling Film) works in the same way as the static cling but has a next generation
micro spear tack coating that clings to the glass.
You can spray the label before you apply it (after printing) to prevent
over spray. Fixative spray is available on this site, from most craft
stores, and most automotive stores. Using a clear spray
as the only protection will offer limited water proofing. If the label is
to be used outdoors we strongly recommend using our WOL over laminate together with
the spray.
Using any of our inkjet media inside an automobile should be considered
an outdoor use because of moisture and extreme temperature changes.
If this media is to be used indoors where steam or moisture is present then
the artwork once printed must be protected with clear spray. For Car windows
we strongly recommend the UCF media.
To extend UV resistance of Inkjet media HPS offers overlaminates with a built
in UV barrier, in both aerosol and sheet form.
Ultra cling can be used on almost any substrate where as Static Cling must
be used on glass or glossy finished items only. Papilio Ultra Cling has
one side coated with inkjet coating and the other side coated with special
cling substance that uses special "micro-spear technology" to CLING to substrates.
This technology is similar to the regular adhesive but when it is time to
remove the label it can be peeled safely off almost any substrate. This
media is in fact similar to our Cling Tack Media but is more advanced and
safer on delicate substrates than ultra low peel adhesive.

home |
help| about us |
e-mail
HPS LLC. Copyright 2003-2007 Papilio.com
|