Color laser temporary tattoo paper.

 

 

 

You can easily fit 20 to 30 tattoos per page. The non stick sheets are used to protect the tattoo until time to be
used. Detailed instructions included. This kit can also be used in most late model laser printers and office copiers.

The tattoos made in this way are waterproof and will last for several days.

About the PTT paper kit

1) Use your favorite paint or draw program, your clip art collection, and your imagination to design your tattoo art.

2) Print A MIRROR IMAGE on to the PTT paper using your Alps printer.

For Alps MD4000: select specially coated paper and multi pass. Other media selections may work as well

If there is no text in the tattoo, you don’t have to print a mirror image. The tattoo will then be a mirror image of the original image. You can easily fit 20 to 30 tattoos per page more or less depending on the size of each tattoo. Test print on regular paper, and then print out on the entire PTT page.

3) Cover each tattoo with the liquid tattoo tack using the foam pads. Try to work fast and deliver just a thin film. If you coat the tattoo  too heavily, the tack may not set up satisfactory. Let the tack coat extend only slightly over the edges of each tattoo.  Now let the TACK set up for at least 12 hours.   If the tack is too thick, it may be impossible to get good results.  Thin the tack using turpentine so the tack will flow on smoothly.

4) After the tack is dry (but still tacky of course) it is time to cut out the tattoos and the non stick paper to the same size. In other words, each piece of paper containing one tattoo on a square piece of paper will need same size piece of the non tack paper.

5) Now staple the wax paper to the tattoo paper and you are done. Before use, the wax paper must be removed. If the wax is sticking to the tattoo, peel it away from the tattoo slowly or it may tear. The purpose of the wax paper is to protect the tattoo from dirt, grease, and lint.

Tattoos made in this way are waterproof and will last for several days.

Note: Do not attempt to copy or print on sheets of PTT paper on which you have already cut holes or pieces off. This can cause paper jams and possible damage to your equipment. For best paper economy, arrange images that fit on the whole sheet, then print on regular paper to test the layout, and print on the whole surface of the PTT paper the first time.

Disclaimer:

As a precaution, do not use the transfer adhesive sheets or  tattoos made in this way if you are pregnant or nursing a baby because of possible migration of chemicals from the copier or printer ink into the body. Before making tattoos in large quantities or for resale, become familiar with the chemical composition of the copier or printer ink you intend to use. Some individuals can develop allergic skin reactions even when using medical grade glue. You must assume all responsibility for the use of this paper. If you do not accept full responsibility for the use of this product, return the unopened package to HPS for a full refund. Terms of sale are as listed on the invoice.