Inkjet Water Slide Decal Paper Media
This page has changed please click here
or wait to be transferred.
|
|
|
Our Inkjet Magnetic is 11 MIL thick Our Inkjet Magnetic paper is 11 MIL thick making it up to 3 times thicker than magnetic paper sold in large office warehouse stores and other large retail outlets. Our inkjet magnetic is still thin enough to feed through all popular inkjet printers without any problem. Don't settle for low quality super thin magnetic media with inferior coating. Once you print on our magnetic paper you will realize the difference.
 To make CLEAR/TRANSPARENT decals 1) Copy/Print on to the glossy side of the media. 2) Apply a thin coat of the Papilio Rub On Decal Tack. (If you are using Transfer Adhesive the follow the instructions that come with the transfer adhesive film.) Let the rub on decal tack dry for few hours, or over night. A second coat should NOT be applied. Applying the decal. 1) Cut out the image with scissors while holding the paper at a constant 90 degree to prevent the media from sticking. 2) Apply the decal face down onto the substrate to be decorated. 3) Apply pressure to the back side of the paper using a solid object, such as a pen or pencil, working in a circular motion. 4) Use your fingers or a sharp object to lift off and discard the paper media. The artwork (the decal) will remain on the substrate. For additional durability the Papilio Rub On Decal may be cover coated with various types of solvent based cover coats: epoxy, urethane, oil enamel, acrylic, etc. This decal paper can also be used on various types of substrates: wood, marble, slate, glass, rock, different types of plastic, metal, most painted substrates, fiber glass, cardboard, etc. DO NOT cut out the decal first and then apply the rub on decal tack as the edges of the paper will absorb the liquid making it difficult transfer the decal later.
Instructions updated Wednesday, August 29, 2007
For other types of clear inkjet vinyl please use the navigation buttons in the upper left hand corner.
Clear Inkjet Vinyl. Here we have yet another great media that prints great in ANY inkjet desktop media. The cleat inkjet vinyl we offer when this is written in November 2002 in matte and the adhesive is slightly opaque. This media is great wherever you need inkjet printed label on clear base stock. Please keep in made that this media is not waterproof. However you can spray this label stock using clear spray. We recommend Krylon Crystal clear acrylic spray available in Wal-Mart or similar product (Rust Oleum) from Home Depot. We will soon or in the beginning of 2003 offer two new types of clear self adhesive inkjet media. Glossy clear inkjet self-adhesive inkjet vinyl and clear ultra low peel cling tack media. 1) Copy/Print on to the coated side of the media using compatible Inkjet Printer. 2) To prevent a paper jam, make sure the vinyl is not bent or warped or corners folded BEFORE loading. Loading by hand ONE SHEET at the time (pressing FF/Ready) is a way to make sure it loads correctly. 3) When gluing a vinyl label to any surface, clean the surface and remove residual grease, soot or dust. 4) It is not recommended (on larger labels such as 11" X 17") to remove all the back paper before installing. It’s better to remove the paper from a small area at one end first such as a 1/2" vertical strip at the left hand or right hand edge. 5) Line up your label. When the position looks correct, let the label make contact with the surface on the edge where you removed the back paper. 6) Now bend the label back and carefully remove the rest of the protective back paper, and glue the label down working from the end you glued first. Then work your way towards the other end holding that end away from the surface. You can use your finger or a sponge and only press down (glue) a small area each time to prevent trapping air bubbles. Do not use excessive pressure when working the label in this way because you may smudge the ink. 7) If the label is used outdoors you must use clear spray and overlaminate. The Overlaminate must be applied in such way that it prevents water from contacting the label. Clear enamel spray is available in most hardware or automotive parts stores. You can spray the label before you apply it (after printing) to prevent over spray. Fixative spray is available in most craft stores or you can use clear spray sold in most automotive parts stores. Use our WOL
|
|
